How to remove skateboard wheels?

Skateboarding is a great sport that can be enjoyed by just about anyone. However, if skateboard wheels get caught in the cracks or surfaces of the sidewalk, they can easily become damaged. So, do you know how to remove skateboard wheels? There are some easy ways to remove skateboard wheels safely and effectively so that you can keep your board in good condition for long periods.

To remove skateboard wheels, use a skate tool or wrench to loosen the axle nuts, then gently wiggle the wheels off the trucks’ axles, ensuring not to lose any washers or spacers in the process.

Skateboard Components

Skateboarding is a fun and exhilarating activity, but it can also be dangerous if not done correctly. Avoid damaging your wheels by never attempting to remove them yourself – skateboarders often use special tools called crushers to do the job safely and effectively.

Make sure the area where you’re working is well-ventilated and wear protective gear like safety glasses, gloves, and a face mask when removing the wheels. Use slow, steady movements to avoid jerking the wheels off or banging them on the ground. Finally, be sure to recycle your skateboard components by taking them to a skateboard shop or shredding service.

When to Change Your Wheels?

Skateboard wheels can only be used for a set time before they start to wear down. It is important to change them when this happens, as the new wheel will have better grip and stability.

There are different ways to remove skateboard wheels – using tools such as a tool or screwdriver, using water, or with a degreaser. Always use caution while removing your wheels since skating without them can be dangerous and lead to injuries.

What tools do you need to change skateboard wheels?

If you’re looking to change skateboard wheels, it’s important to have the right tools on hand. Here are four of the most commonly used items: a screwdriver, wrench, spanner, and Spanner set.

Always wear safety goggles and gloves when removing the wheels – this will help keep you safe from any potential injury. To avoid making any mess while changing the wheels, make sure to clean up everything before moving on to the next task!

How do you remove old skateboard wheels?

Skateboard wheels can get old and rusty over time, which can lead to them becoming difficult or even impossible to remove. By using a skater wheel removal tool, you will be able to safely and easily remove the wheels without any damage being done.

It can be frustrating to try and remove skateboard wheels from a skateboard – especially when they’re stuck on tight. The good news is that it’s easy to change skateboard wheels safely and effectively with a few simple steps. Also, you should learn how to remove bearings from shaft.


Skateboarding can be lots of fun, but it can also be dangerous if you don’t take the proper precautions. One of the most important steps in skateboarding safety is ensuring that the ground is clean and free of any debris. This will help to prevent accidents from happening in the first place.

Next, remove the skateboard wheels by using pliers or a wrench – BE CAREFUL NOT TO DAMAGE THE BEARINGS! Place them on their side so that they are facing downwards and twist them counter-clockwise. Finally, hold down the wheel with one hand while twisting it with your other hand.

Removing old skateboard wheels

Skateboarders rejoice! It’s that time of the year when old skateboard wheels must go. Here are a few tips to make the removal process as safe and effective as possible:

  • Use a skater’s wheel removal tool – this will help you get the job done quickly and efficiently.
  • Make sure the surface you are working on is non-slippery, free from debris, and devoid of nails or other sharp objects – otherwise your safety could be at risk.
  • Once the old wheels have been removed, it is important to clean up any mess made during the process and prepare for new ones.

Wheel referencing

Wheel referencing is an essential skill for skateboarders. It helps to avoid accidents and protect your floor or walls from scratches or damage. Here are four easy steps to follow:

  • Always use a level surface when changing skateboard wheels – this will ensure that the new wheel is placed at the correct height above the ground.
  • When removing the wheel, make sure to grip it firmly and twist it in a counter-clockwise direction – this will help prevent it from coming off of the hub easily while you’re spinning it around on the axle.
  • Once the wheel is off, hold on to both sides of its rim and slowly spin it so that it falls off of its hub smoothly – be careful not to scratch or damage anything in your process!

4 Finally, be sure not to leave any old wheels laying around – they can get stepped on by other people, which can potentially cause injuries!


Cleaning skateboard wheels can be a tedious task, but it’s important to do it properly to avoid any damage. Follow these steps to clean them effectively:

  • First, make sure to clean the wheel completely. Use a degreaser or soap and water combination to loosen any dirt and debris stuck on the wheel surface.
  • Once the dirt has been removed, use a scrub brush or hose attachment on your vacuum cleaner to clean the wheel well area thoroughly. Be sure not to miss any of the small nooks and crannies around the wheel!
  • Finally, using an air duster or compressed air tool, take care of all of the surfaces surrounding the skateboard wheels

Installing the replacement skateboard wheels

When it comes to skateboarding, wheel replacement is an occasion worth celebrating! Here are a few tips that will help you get the job done easily and safely:

  • Wear gloves and safety goggles when changing wheels – this will prevent any accidental injuries.
  • Turn the skateboard so that the wheels are pointing away from you and the ground – this will minimize the chances of getting injured if something falls on top of your board while you’re working.
  • Place a large, heavy object on top of the skateboard to stop it from moving – be sure not to scratch your new deck! Using a screwdriver, remove old wheels carefully; make sure not to damage them too much in the process!
  • Install new wheels by reversing these steps – first ensure that they’re correctly seated on axle bearings, then tighten wheel bolts using the wrench provided.


How to remove skateboard wheels? If you have skateboard wheels that are causing you grief, this blog is for you! By following the instructions outlined in this blog, you will be able to change skateboard wheels safely and effectively. Make sure to read the whole blog before beginning to avoid any potential accidents.

Looking for your precious feedback in the comment section! Thank you!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top