How to Take off Skateboard Trucks?

Skateboard trucks are metal axles that attach the wheels to the deck. While they may seem indestructible, they need to be regularly maintained to keep them in good condition. Over time, the axles can become bent or broken, and the wheels can become loose. Being a skateboarder, it’s important to know how to take off your skateboard trucks so that you can replace them when necessary.

To remove skateboard trucks, use a skate tool to unscrew the bolts connecting them to the deck. Lift the trucks off the deck once the bolts are loosened.

The Function of Skateboard Trucks

When skating the skateboard, trucks are responsible for transferring power from the deck to your feet. They also allow you to turn and carve in a variety of ways. When buying a new skateboard, make sure to consider the type of trucks that are available.

Penny trucks

These are small and lightweight trucks that sit lower on the board, making it easier to do tricks such as ollies and kickflips. They’re also good for cruising around because they provide stability while moving at a slow speed.

Big-block truck

The biggest and most popular type of truck is the big-block truck. These are usually heavier than penny trucks, which makes them more stable when doing tricks standing up or riding low to the ground. They’re also good for cruising because they provide stability while moving at a slower speed. Penny trucks: good for cruising, ollies, and kickflips.

Why is learning how to take off skateboard trucks important?

Skateboard trucks are important because they help keep the board stable and in contact with the ground as you skate. Without them, your board would wobble and potentially fall off. If you’re new to skateboarding, it’s important to learn how to take off skateboard trucks so that you can stay safe and have a more stable ride.

There are several ways to do this, and each one depends on the type of truck your board has.

For boards with poppy screws

For boards with poppy screws, first, loosen all the screws around the perimeter of the board using a screwdriver. Make sure not to lose any of these screws! After they’re loose, slowly lift on one side of the truck until it pops out from between the deck and bottom plate (the plastic or metal part of the skateboard that slides on the ground). Be sure to hold onto the truck while doing this, as it may be heavy.

For boards with hexagonal screws

For boards with hexagonal screws, unscrew all six of them around the perimeter of the board. Grip one end of each screwdriver and use your fingers to gently pull each one out. Again, make sure not to lose any screws! Once they’re all out, lift on one edge of the truck until it pops free from between the deck and bottom plate (the plastic or metal part of the skateboard that slides on the ground).

If you’re having trouble removing your truck, there are a few things you can do to try and fix the problem.

• First, make sure that all of the screws are properly tight – sometimes people remove screws without realizing it and then the trucks become loose.
• Second, check to see if anything is blocking one end of the screwdriver from getting a good grip on the screw-head – this could be something as simple as dust or sand stuck between the top of the truck and the screwdriver blade.
• Finally, use a prying tool if necessary to lever up on one edge of the screw until it pops out.

Things you need to know before taking off your skateboard trucks

When you’re ready to take your skateboard trucks off, make sure you follow these steps:

• Locate and remove the screws that hold the truck base to the board. There are usually four screws on each side. use a Phillips head screwdriver to remove them. Be careful not to lose any of these screws! You’ll need them later when re-attaching your truck baseplate

• Place a flat surface on the ground (such as an old towel), and position your skateboard so that one wheel is hanging over it by about 1 inch. Holding the board with one hand, use a screwdriver to remove the remaining three screws from the truck baseplate.

• Now gently lift off your skateboard trucks and set them aside.

• If you have an assembled skateboard, be sure to replace the truck baseplate before re-attaching your wheels!

Steps to take off skateboard trucks

• Locate the screws that hold the truck to the skateboard deck. There are usually three or four of them, and they will be on either side of the truck. Use a Phillips head screwdriver to remove these screws.

• Move the truck away from the board until it is free enough to grip with your fingers and pull it off of the deck altogether. Be careful not to lose any parts while doing this!

• If you want to keep your trucks, you can unscrew them from their baseplate (this is where they attach to your board) and reattach them to new boards using the screws that are included.

• If you want to get rid of your trucks, they can be disposed of in several ways- in the trash, buried under some dirt, or burned. It’s up to you what happens to them!

Also, have a look at how to remove wheel lock without key for more information about skateboards.

Tips for taking off skateboard trucks

• First, remove your skateboard’s trucks by unscrewing the bolts that hold them in place. Be careful not to lose any of the screws!
• Next, use a screwdriver and pliers to loosen each axle nut. You’ll need three per truck–two on the side near the wheels, and one on top near where it attaches to the frame.
• Finally, lift each axle out of its socket and set them aside on some safe surface nearby. Make sure you write down which bolt each axle nut was attached to, in case you need them later.
• Once all the nuts are loose, it’s easy to remove the trucks from your skateboard! Just grip each one with your fingers and pull gently until they come free.
• If you have any metal shavings or screws from the removal process, it’s a good idea to clean them up with a damp cloth before re-installing your trucks.

Conclusion

How to take off skateboard trucks? Taking off skateboard trucks is not difficult, but there are a few things you need to know before you get started. First, you need to make sure that your trucks are the right size for your skateboard. Second, you need to loosen the kingpin nut before you can remove the trucks. Finally, you need to use a skate tool or a socket wrench to remove the trucks.

Waiting for your feedback to do more hard work for providing you with more information about skateboards. Thank you!